2015 Nissan Murano Owner's Manual - Page 123

CLIMATE CONTROLLED SEAT SWITCH (if so equipped) 3. When the seat is warmed or before you leave the vehicle, be sure to turn the switch off. LIC2876 LIC2877 The 2nd row seats are warmed by built-in heaters. The switches are located on the rear of the front center console and can be operated independently of each other. 1. Start the engine. 2. Push the LO or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from under the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine. A to the heat side ᭺ 1 2. Turn the control knob ᭺ 2 . The indicator light ᭺ B on or the cool side ᭺ the control knob will illuminate. 3. Adjust the desired amount of air using the control knob. The climate controlled seat blower remains on low speed for approximately 60 seconds after turning the switch on or selecting the desired temperature. 2-36 Instruments and controls