1995 Oldsmobile Aurora Owner's Manual - Page 100

HomeLink (Option) TM Universal Transmitter This device complies withP r 15 of the FCC Rules. at Operation is subject to the followingtwo conditions: (1) This devicemay not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Programming the Transmitter Do not use the HomeLink" Transmitter with any earage door opener that does not have the "stop and reverse" safety feature. This includes any garage door opener model manufxtured before April 1, 1982. L Be S L W ~ that people Lrnd objects are clear of the garage door you cue progrcunu~ir'rg! Your vehicle's engine should be turned off while programming your transmitter. Follow these steps to program up to three channels: This transmitter allows you to consolidate the functions of up to three individual hand-held transmitters. It will operate garage doors and gates, or with the accessory package, other devices controlled by radio frequency such as home/office lighting systems and security systems. The transmitter will learn and transmit the frequencies of most current transmitters and is powered by your vehicle's battery and charging system. 1. If you have previously programmed a HomeLink channel, proceed to Step 2. Otherwise, hold down the two outside buttons on the HomeLink Transmitter until the red light begins to flash rapidly (approximately 20 seconds). Then release the buttons. This procedure initializes the memory and erases any previous settings for all three channels. 2. Hold the end of your hand-held transmitter against the bottom surface of the HomeLink Transmitter so that you can still see the red light. 2-48