1998 Oldsmobile Aurora Owner's Manual - Page 287

High-Beam Headlamp Bulbs If you need to replace a high-beam headlamp bulb, do the following: 4. To replace the bulb, angle the new bulb into the empty socket. 5 . Push the base of the bulb down to lock it into place. 6. If you removed the headlamp assembly, reassemble it by aligning the pin and tightening the two bolts to secure it. 1. Remove the headlamp assembly if you need more hand clearance. 2. Pull up on the wiring harness. This unlocks the bulb. Front Turn Signal The turn signal bulb is on the inboard edge of the headlamp assembly. To replace abulb, do the following: 1. Remove the headlamp assembly if you need more hand clearance. 2. Reach in and press the locking tab while twisting the bulb assembly one-quarter of a turn to the left (counterclockwise). 3. Replace the bulb and reverse Step2 to reassemble. 3. Now you can reach in behind the lamp housing and pull out the bulb. 4. If you removed the headlamp assembly, reassemble it by aligning the pin and tightening the two bolts to secure it. 6-35