2005 Saab 9-3 Owner's Manual - Page 149

Starting and driving LOCK position The parking lights, hazard warning lights and interior lighting can be turned on. Cars with automatic transmission: Move the gear lever to P. The gear lever is locked in position. This is the only position in which the remote control can be removed. Cars with manual transmission: The remote control can be removed regardless of the position of the gear lever. OFF position Parts of the electrical system are operative. Do not leave the remote control in the OFF position with the engine not running as this could cause the battery to run flat in a matter of hours. Cars with automatic transmission: The gear lever is not locked. See also page 160. ON position The entire electrical system is operative. Do not leave the remote control in the ON position when the engine is not running. Turn the remote control to the OFF position to disconnect the electrical system. When you turn the remote control to ON, some indicator and warning lights will come on in the main instrument panel. These should go out after about 3 seconds. ST - starter position The starter motor operates (automatic transmission: selector lever must be in P or N) when the remote control is turned to this position. When released, the remote control will spring back to the ON position. The car has an electronic restart lock. If the engine fails to start, the remote control must first be turned back to a position between OFF and LOCK before the starter motor can be operated again. 147 To allow the various systems in the car time to register that the remote control has been inserted into the ignition switch, do not turn the remote control for roughly half a second.