1999 Subaru Legacy Owner's Manual - Page 183

Audio J Program switching button (PROG) When the program switching button is pressed during playback, the tape travel indicators will switch and the player will begin playing back the opposite side of the tape. The same mechanism is automatically activated when the end of the tape is reached. This allows the opposite side of the tape to play, providing continuous playback. J Fast-forward button (FF) To fast-forward the tape, press the "FF" button. To stop fast-forwarding, press the "STOP/EJ" button. J Rewind button (REW) To rewind the tape, press the "REW" button. To stop rewinding, press the "STOP/EJ" button. J Stop and eject button (STOP/EJ) When the "STOP/EJ" button is pressed, playback stops and the cassette tape is ejected. The ejection function also operates when the ignition switch is turned off. Always make certain that you remove the cassette tape. J Tape program sensor button (TPS) Press the "TPS" button during playback to return to the beginning of the current selection or to skip to the beginning of the next selection. To use this function, press the "TPS" button to turn on the "TPS" indicator. If the fast-forward button (FF) is then pressed, the player advances the tape to the beginning of the next selection and starts playing it. If the rewind button (REW) is pressed instead, the player rewinds the tape to the beginning of the current selection and starts replaying it. The "TPS" function may not operate properly under the following conditions: D When the recording level is low. D When there are long pauses in the middle of a selection. D When the tape contains verbal material such as conversations. D When the blanks between selections are shorter than five seconds. D When there are no blanks between selections (live concerts, etc.). - CONTINUED - 5-15