2008 Subaru Outback Owner's Manual - Page 46

Seat, seatbelt and SRS airbags 1-21 2. Pull out the seatbelt slowly from the retractor. "CENTER" on the left-hand side until it clicks. 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 4. After fastening the seatbelt, make sure that the " " mark on the connector (tongue) and the " " mark on the buckle face outwards. 6. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as low as possible on your hips, not on your waist. 5. Insert the center seatbelt tongue plate into the center seatbelt buckle marked - CONTINUED -