2007 Suzuki Grand Vitara Owner's Manual - Page 81

INSTRUMENT PANEL quickly, hold in the "H" button (4) for about 1 second and continue holding. • To set the minute display, push the "M" button (5) repeatedly to advance the minute display. To advance the minute display quickly, hold in the "M" button (5) for about 1 second and continue holding. (a) Thermometer (2) The thermometer shows the outside temperature when the ignition switch is in the "ON" position. If the outside temperature nears freezing, the mark (7) will come on when the display shows the outside temperature. NOTE: The thermometer will not indicate the actual outside temperature when driving at low speed, or when stopped. You can change the unit indication of the thermometer between °F and °C. To change the indication, follow the instructions below. 1) Turn the ignition switch to the "ACC" or "ON" position while holding in the "DISP" button (6). The unit display of the thermometer will blink. (b) 66J199 2) Push the "DISP" button (6) quickly to change the indication between °F and °C as shown in the illustration. 3) Hold in the "DISP" button (6) for more than 2 seconds, and the unit indication will stop blinking. If you don't push the "DISP" button (6) within about 8 seconds after the unit display starts blinking, the unit display will automatically stop blinking. (c) (d) Fuel Consumption and Driving Range (3) This display can be changed to show instantaneous fuel consumption, average fuel consumption, driving range. Also, the display of fuel consumption can be turned off if you desire. 66J200 Every time you push the "DISP" button (6), the display will be changed among the following four displays. (a) (b) (c) (d) Instantaneous fuel consumption Average fuel consumption Driving range No display 4-18