3Com 3CBLUG16A User Guide - Page 35
Sample VLAN Configurations, Setting Up Two VLANs on the Same Switch
UPC - 662705544489
View all 3Com 3CBLUG16A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
happens, you will need to reset the Switch to factory settings. To create a VLAN: 1 On the menu, click VLANs. The VLANs page appears. 2 In VLAN ID, click Create New VLAN. 3 In VLAN ID (1-4094), type an unused ID number for the VLAN that you are creating. VLAN IDs range from 1 to 4094. Figure 15 Create VLANs Page Configuring VLANs 35 ■ U - Uplink egress packets ■ D - Desktop egress packets 5 Click Apply to create the VLAN. For examples on setting up VLANs, refer to "Sample VLAN Configurations" on page 35. Sample VLAN Configurations To illustrate how you can segment network devices that are connected to the Switch, the following sample configurations are provided. Setting Up Two VLANs on the Same Switch Figure 16 illustrates how you can set up a simple VLAN on the Switch using desktop connections. 4 Define the VLAN membership by setting the state of each port. To change states, click the icon under the port number repeatedly to cycle through the different states. Available states include: ■ N - Not a member