3Com 3CBLUG16A User Guide - Page 42
Running Cable Diagnostic, Using the System Tools, Restart
UPC - 662705544489
View all 3Com 3CBLUG16A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 CHAPTER 4: CONFIGURING THE SWITCH ■ Analyzer Port - This is the port to which the analyzer is attached. 4 Click Apply. For information on how to interpret the output on the port analyzer, refer to its accompanying documentation. Running Cable Diagnostic The Switch provides cable diagnostic, which helps you detect and resolve issues with the attached cables. The Switch can run four types of cable diagnostic tests: ■ Basic Diag ■ Pair Swap ■ Pair Polarity ■ Pair Skew To run any of these tests on a port: 1 In Port to Diagnose, select a port number. 2 In Type of Diagnosis, select the cable test that you want to run. 3 Click Apply. Figure 24 Cable Diagnostic Page Using the System Tools The System Tools menu includes five administration items: Restart, Configuration, Upgrade, Spanning Tree and 802.1p Prioritization. Restart Pressing the Restart the Switch button has the same effect as power cycling the unit. No configuration information will be lost. This function may be of use if you are experiencing problems and you wish to re-establish your Internet connection.