3Com 3CBLUG16A User Guide - Page 49
Troubleshooting, Forgotten Password, Forgotten Static IP Address, Solving LED Issues - 3 com
UPC - 662705544489
View all 3Com 3CBLUG16A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 TROUBLESHOOTING This chapter lists some issues that you may encounter while installing, using, and managing the Switch, with suggested courses of corrective action to take. If you encounter an issue that is not listed here and you cannot solve it, check the 3Com Knowledgebase at http://knowledgebase.3com.com before contacting your local technical support representative. For more information on how to obtain support for your Switch, refer to Appendix A. Forgotten Password If you forget the password to the Web interface after you set it, you will need to reset the Switch to regain access. See "Resetting to Factory Defaults" on page 43 for instructions. After resetting the Switch, log on to the Web interface using the default admin account settings: ■ User name - admin ■ Password - blank (no password) Forgotten Static IP Address If you forget the static IP address that you assigned to the Switch and you need to access the Web interface, use the Discovery application to automatically detect the IP address and connect to the interface. For information on using the Discovery application, refer to "Running the Discovery Application" on page 21. Solving LED Issues This section lists some issues that are related to the LEDs on the front panel of the Switch. For information on basic LED checks, refer to the following topics in Chapter 1: ■ (3) Link/Activity Status LEDs ■ (4) Module Active LEDs ■ (5) Port Duplex LEDs ■ (6) Power LED A link is connected but the Link/Activity Status LED for the port does not light There is a problem with this connection. Check that: