3Com 3CBLUG16A User Guide - Page 36
Setting Up VLAN Across Two Switches, Ports 7 - baseline switch
UPC - 662705544489
View all 3Com 3CBLUG16A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 CHAPTER 4: CONFIGURING THE SWITCH Figure 16 Desktop VLAN Configuration Endstations in VLAN 1 Endstations in VLAN 2 Baseline Switch 2824-SFP Plus add another port to the VLAN or change the port configuration. Setting Up VLAN Across Two Switches This example explains how you can set up a VLAN across two Switches using uplink connections. This enables ports that are members of the same VLAN (but are on different switches) to communicate, provided that a port on each Switch is set to uplink, and that these ports are connected. Server Server in VLAN 1 in VLAN 2 If you want to add ports 7, 8, and 16 to VLAN2 (as shown in Figure 16), so that the ports on the default VLAN1 and the ports on VLAN2 cannot communicate with each other, do the following: 1 Create a new VLAN and set the VLAN ID to 2. Refer to "Creating a VLAN" for instructions. VLAN1 is the default VLAN and already exists. 2 Set ports 7, 8, and 16 to D (desktop egress packet). 3 Click Apply. Ports 7, 8, and 16 now belong to VLAN2, and will not be able communicate with any other ports, unless you