3Com 3CRWE554G72T User Guide - Page 35
Dynamic IP Address Mode, Clone MAC Address screen displays. - mtu
UPC - 662705481685
View all 3Com 3CRWE554G72T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Accessing the Wizard 35 3 Enter your PPP over Ethernet service name in the PPPoE Service Name text box. Do not enter anything in this box if your ISP does not require a service name. 4 Enter the MTU value supplied by your ISP in the MTU text box. If your ISP has not supplied an MTU value, leave this at the default value. The default is 1454. 5 Select an idle time from the Maximum Idle Time drop down list. This is the amount of time without Internet activity that you want to allow before the Router ends the PPPoE session. 6 Check all of your settings, and then click Next. Refer to "LAN Settings" on page 40 for more information. Dynamic IP Address Mode To setup the Router for use with a dynamic IP address connection: 1 Select the ISP provides configuration dynamically (via DHCP) and then click Next. See Figure 16. Figure 18 Hostname Screen 2 Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box (Figure 18) and click Next. The Clone MAC Address screen displays.