3Com 3CRWE554G72T User Guide - Page 66

Connection to ISP, L2TP is supported by some Internet Service Providers ISPs. Check - software

Page 66 highlights

66 CHAPTER 5: ROUTER CONFIGURATION When you install the Router, you will not need to use the PPPoE software on your PC. 4 PPTP (DSL or Cable) PPTP is only used by some European providers. If the installation instructions that accompany your modem ask you to setup a dialup connection using a PPTP VPN tunnel then select this option. To configure the Router you will need to know the following: ■ User name ■ Password ■ VPN Server address (usually your modem) When you install the Router, you will not need to use the dialup VPN on your PC anymore. 5 L2TP (DSL or Cable) L2TP is supported by some Internet Service Providers (ISPs). Check with your ISP to make sure L2TP is supported before selecting this option. To configure the Router you will need to know the following: ■ User name ■ Password ■ L2TP Server address Connection to ISP Before beginning this section, ensure you have the required information from your ISP. (See "Before you Install your Router" on page 21.) Select Internet Settings from the main menu to display Connection to ISP. Choose an IP Allocation Mode from the drop down box. Select an IP Allocation Mode from the following: ■ Static IP address (to be specified manually) see page 67 ■ Dynamic IP address (automatically allocated) see page 68 ■ PPPoE (used by DSL providers only) see page 69 ■ PPTP (used by some European providers) see page 70 ■ L2TP (supported by some ISPs) see page 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146

66
C
HAPTER
5: R
OUTER
C
ONFIGURATION
When you install the Router, you will not need to use the PPPoE software
on your PC.
4
PPTP (DSL or Cable)
PPTP is only used by some European providers. If the installation
instructions that accompany your modem ask you to setup a dialup
connection using a PPTP VPN tunnel then select this option. To configure
the Router you will need to know the following:
User name
Password
VPN Server address (usually your modem)
When you install the Router, you will not need to use the dialup VPN on
your PC anymore.
5
L2TP (DSL or Cable)
L2TP is supported by some Internet Service Providers (ISPs). Check with
your ISP to make sure L2TP is supported before selecting this option. To
configure the Router you will need to know the following:
User name
Password
L2TP Server address
Connection to ISP
Before beginning this section, ensure you have the required information
from your ISP. (See
Before you Install your Router
on
page 21
.)
Select
Internet Settings
from the main menu to display
Connection to ISP
.
Choose an
IP Allocation Mode
from the drop down box.
Select an IP Allocation Mode from the following:
Static IP address (to be specified manually) see
page 67
Dynamic IP address (automatically allocated) see
page 68
PPPoE (used by DSL providers only) see
page 69
PPTP (used by some European providers) see
page 70
L2TP (supported by some ISPs) see
page 72