3Com 3CRWE554G72T User Guide - Page 49
DHCP Clients List, IP Pool Start Address, or
UPC - 662705481685
View all 3Com 3CRWE554G72T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
LAN Settings 49 The LAN Settings screen is used to specify the LAN IP address of your Router, and to configure the DHCP server. 1 Select Unit Configuration and then specify the Router IP Address and Subnet Mask in the LAN Settings section. The default IP address of the Router is 192.168.1.1. 2 If you want to use the Router as a DHCP Server, check the Enable check box. 3 Clicking Auto Range will automatically choose the largest available range of addresses for your network. Alternatively, you can change the address range by changing the last digit(s) of the IP Pool Start Address, or the IP Pool End Address, or both. 4 If you use 3Com NBX telephones, enter the IP address of the NBX call processor at 3Com NBX Call Processor. 5 Check all of your settings, and then click Apply. The DHCP server will give out addresses to both wired and wireless clients. DHCP Clients List Figure 33 DHCP Clients List Screen The DHCP Clients List provides details on the devices that have received IP addresses from the Router. The list is only created when the Router is set up as a DHCP server. For each device that is connected to the LAN the following information is displayed: