Airlink AML001 Manual - Page 31
Register S2 see S2°AT Escape Character identifies the escape sequence, software that issues
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PCI Modem Card User's Manual by register S12 (see S12-Escape Guard Time), the escape guard time. Register S2 (see S2-AT Escape Character) identifies the escape sequence character. A/-Repeat Last Command Use this command to repeat the last AT command. The modem repeats the command currently in the command buffer. Do not use the AT prefix with this command. Do not conclude the command with a terminating character such as enter. A-Answer This command instructs the soft modem to go off-hook and answer an incoming call. B-Communication Standard Setting Use this command to select the communication standard used by the soft modem. B0 Selects CCITT V.22 mode when the modem is at 1200 bits/s. B1 Selects Bell 212A when the modem is at 1200 bits/s (default). B2 Deselects V.23 reverse channel (same as B3). B3 Deselects V.23 reverse channel (same as B2). B15 Selects V.21 when the modem is at 300 bits/s. B16 Selects Bell 103J when the modem is at 300 bits/s (default). C-Carrier Control This command is supported to ensure compatibility with communications software that issues the C1 command. However, this modem does not support the C0 command. The C0 command instructs some modems not to send carrier (i.e., it puts them in receive-only mode). C1 Normal transmit carrier switching (default). D-Dial This command instructs the soft modem to go off-hook and begin the dialing sequence. The dial string (, including modifiers and the telephone number) is entered after the D command. A dial string can be up to sixty characters long. Any digit or symbol may be dialed as touchtone digits. Characters such as spaces, hyphens, and 30