Airlink AML001 Manual - Page 53
Buffer Management, <pending_TD> Parameter Values, timer expires, discard the remaining data.
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
PCI Modem Card User's Manual +ETBM=,,-Call Termination Buffer Management Use this command to set the behavior of the modem during call termination. The parameter controls how previously-transmitted data remaining in the DCE buffers is handled when the DTE request a disconnect from the call. The parameter controls how previouslyreceived data remaining in the DCE buffers is handled when the remote DCE disconnects the call. The parameter sets the maximum amount of time the soft modem will attempt to deliver the buffered data before abandoning the attempt and discarding any remaining data. Parameter Values: 0 Modem discards all buffered data immediately and disconnects. 1 Modem ignores the timer and attempts to deliver the data until it is acknowledged. If the remote DCE disconnects, discard the remaining data. 2 Modem attempts to deliver the data until the data is acknowledged. If the remote DCE dis-connects, or the timer expires, discard the remaining data. Parameter Values: 0 Modem discards all buffered data immediately and disconnects. 1 Modem ignores the timer and attempts to deliver the data until it is acknowledged. If the local DTE request a disconnect, discard the remaining data. 2 Modem attempts to deliver the data until the data is acknowledged. If the local DTE request a disconnect, or the timer expires, discard the remaining data. Parameter Values: 0 Modem does not attempt to deliver data. 1-254 Modem attempts to deliver data for the amount of time set by the parameter. +EWIND=,-Window Size Use this command to set the maximum number of acknowledged frames allowed at the link layer. Changes set by the command take effect when the next connection is established. sets the maximum window size for the transmit direction and sets the maximum window size for the receive direction. The default value for is 15. +FCLASS=-Service Class Indication 52