Airlink AML001 Manual - Page 7
Hardware Installation, 2.1 Installing the Card, 2.2 Connection
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Chapter 2 Hardware Installation 2.1 Installing the Card Step1 Step 2 Step 3 With the power to your computer disconnected, remove PC casing. Note: Some PCI compliant motherboards supply power to the slots even when the PC is turned off. To prevent damage to your PC or PCI modem card, always unplug the power cord when installing or removing PCI modem cards. Press the PCI card into the empty PCI slot firmly, and secure it with screws to your computer. Reinstall the casing on your computer. 2.2 Connection Step 1 Step 2 Plug one end of the phone cord into LINE jack and the other end to the wall phone jack. When you are not using the modem, you can use a telephone on the modem's phone line. Plug your telephone's cord into the modem's PHONE jack. The figure below illustrates the typical connection of internal modem card. After hardware installation, turn on your computer and the system should detect the modem upon startup. Proceed to next section to install the drivers. 3