Airlink AML001 Manual - Page 33
I0, I3, I10, I11, ATI 11, Returns country ID in English.
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
PCI Modem Card User's Manual E-Echo Command Use this command to enable or disable the soft modem echo feature. When the echo feature is selected and the modem is in command mode, characters sent to the modem are sent back to the host and displayed on the monitor. E0 Disables echo command. E1 Enables echo command (default). F-On-Line Data Character Echo Command This command is supported to ensure compatibility with communications software that issues the F1 command. The F0 version of this command is not supported. This command was originally used to set echo features for the DTE. F0 On-line data character echo enabled (not support). F1 On-line data character echo disabled. H-Hook Control This command instructs the modem to go either on-hook to disconnect a call or off-hook to make the telephone line busy. H0 soft modem goes on-hook (default). H1 soft modem goes off-hook. I-Request ID Information This command displays specific product information about the modem. I0, I3 Returns modem identity string and driver version number. I1 Returns OK. I2 Returns OK. I4 Returns the driver build date. I5 Returns the driver version, bus type (PCI, AC97), codec type, and country. I6 Returns OK. I7 Hardware version. I8 Codec type. I9 Returns country ID in English. I10, I11 Displays connection information. If the modem has not connected with a remote DCE the ATI 11 commands returns No Previous Call. The ATI 11 command may be issued from on-line command mode or after the end of a call. After a call, some of the values are no longer valid. 32