Airlink AML001 Manual - Page 42
except S3, S4, and S5.
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Appendix A AT Commands &S1 DSR comes on after establishing a connection and goes off when the connection ends. &T-Self-Test Commands Use this command to perform diagnostic tests on the modem. Each test is designed to isolate a problem location when experiencing periodic data loss or random errors. &T0 &T1 &T3 &T6 Abort. Terminates the test in progress. Initializes local analog loopback, V.56 Loop 3. If a connection exists when this command is issued, the modem hangs up. The modem displays the CONNECT message at the start of the test. Local digital loopback test, V.54 Loop2. If no connection exists, the soft modem returns ERROR. Requests a remote digital loop back, V.54 Loop 2 without self test. If no connection exists, the soft modem returns ERROR and generates the CONNECT result code. &V- Display Current Configuration Use this command to display the current soft modem configuration. The modem maintains two stored profiles and the active profile. This command displays all three configurations and any stored telephone numbers. &W-Store Current Configuration Use this command to store the modems command options and all S registers except S3, S4, and S5. The Z command or a powerup reset, of the modem, restores this profiles. &W0 &W1 Stores the current configuration as profile 0. Stores the current configuration as profile 1. &Y-Select Stored Profile for Hard Reset This command does not change the behavior of the modem but is included for compatibility with applications that issue the &Y command. &Z=-Store Telephone Number Use this command to store a dialing string. The soft modem can save four dialing strings. The dial string may contain up to 34 characters. The ATDS= command dials using the stored string. 41