Airlink AML001 Manual - Page 39
Call Waiting Detected, No Dialtone
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PCI Modem Card User's Manual • CALL WAITING DETECTED X5 Busy detection is enabled; blind dialing is disabled. The dialing cannot be conducted unless a dial tone is detected. If dial tone is not detected within the time specified by register S6, the NO DIAL-TONE result code will be reported. The following result codes are supported: • OK • RING • NO CARRIER • ERROR • NO DIALTONE • BUSY • CONNECT • RRING • NO BONGTONE • DELAYED • BLACKLISTED • WARBLE • CALL WAITING DETECTED Y-Long-Space Disconnect This command is supported to ensure compatibility with communication software that issues the Y0 command. Long-space disconnect is always disabled. Y0 Disables long-space disconnect (default). Z-Reset and Recall Stored Profile Use this command to force the soft modem to go on-hook and restore a profile saved by the &W command. Soft modem products have two stored profiles and the active profile. The parameter selects the stored profile to copy into the active profile. Z0 Reset and restore stored profile 0. Z1 Reset and restore stored profile 1. &B-V.32 Auto Retrain This command is supported to ensure compatibility with communications software that issues the B1 command. The B0 version of this command is not supported. &B0 &B1 Disable V.32 auto-retrain (not supported). Enable V.32 auto-retrain (default). &C-Data Carrier Detect (DCD) Control 38