Airlink AML001 Manual - Page 32
Dial Modifiers, Modifier, Function Name, Description, &Z<location>=<dial string>
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Appendix A AT Commands parentheses are ignored by the modem and may be included in the dial string to enhance readability. Dial Modifiers Modifier Function Name Description L Dial the last number Instructs the modem to dial the last number dialed. This modifier is valid only if it is the first symbol of the dial string. All consecutive characters are discarded. P Select pulse dialing - T Select tone - dialing(default) W Wait for dial tone Instructs the modem to wait for a second dial tone before processing the dial string. , Dial pause Instructs the modem to pause before processing the next character in the dial string. Register S8 determines the length of the pause. ! Hook flash Instructs the modem to go on-hook for 0.5 s and then return to off-hook. @ Wait for quiet Instructs the modem to wait for 5 s of answer silence after dialing the number. If silence is not detected, the modem sends a NO ANSWER result code back to the user. ; Return to command Instructs the modem to return to mode command mode after it has finished dialing without disconnecting the call. This modifier must be the last character in the dial string. $ Bong tone detection - S= Dial from register Instructs the modem to dial a telephone number previously stored using the &Z= command. Valid storage locations are 0-3. 31