Alpine IVE-W530 Owner's Manual (english) - Page 20
If a menu screen appears, Press, Touch, To eject the disc, Direct Menu Operations, Menu Operations - remote
View all Alpine IVE-W530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1 Press SOURCE/ . The SOURCE selection screen is displayed. 2 Touch [Disc]*. The display shows the DISC mode screen. Insert a disc with the label side facing up. The unit starts to play the disc. When an optical Alpine DVD player is connected, insert a disc into the DVD/CD player, and the player starts playing. * When you want to play a DivX file from a USB device, touch [USB]. • The operation screen changes to the visual screen in the DVD mode for 5 seconds after an operation has been performed. Touch the display panel to display the operation screen again. • The display mode can be changed by touching [WIDE]. For operation, see "Switching Display Modes" on page 28. To eject the disc Press . • The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it. • If the disc does not eject, press and hold for at least 3 seconds. • Do not insert discs containing maps for the navigation system. Doing so could result in damage. • Be sure that the remote input lead is connected to the remote output lead of this unit when a DVD player is connected. If not correctly connected, touching operation cannot be performed. • Refer also to "DVD Setup" (pages 29 to 30). • If the disc is left in the unit after pressing , the disc is automatically pulled back into the unit and stopped. In this case, start playback by touching [ / ] or eject again and remove the disc within 15 seconds. • While "Index reading" is displayed by DivX®, the fast-forwarding/ fast-reversing and repeat functions, etc. cannot be used. If a menu screen appears On DVDs, menu screens may appear automatically. If this happens, perform the operation described below to start playback. Direct Menu Operations 1 Touch the DVD menu directly. • Some operations cannot be performed depending on the disc. Menu Operations 1 Touch screen to display the operation keys. 2 Touch [Key]. The menu operation mode will be displayed. Touch [ ] to return to the previous display. (Operation may not be possible, depending on the disc.) 3 Select a desired menu item by touching or [ ]. 4 Touch [Enter] to confirm the selected item. Numeric Keypad Input Operations 1 Touch screen to display the operation keys. 2 Touch [Key]. The menu operation mode appears. 3 Touch [Key] again. The numeric keypad input mode screen appears. The numeric keypad input screen closes when the area is touched while being displayed. Touch [ ] to close the numeric keypad input screen. 4 Touch a desired number. 5 Touch [Enter] on the numeric keypad mode screen to confirm your selection. 20-EN