Alpine IVE-W530 Owner's Manual (english) - Page 26
Adjusting the Balance/Fader Directly, Setting the Treble Center Frequency
View all Alpine IVE-W530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting the Bass Center Frequency The displayed bass frequency is emphasized. Touch [ ] or [ ] of Freq. to select the desired bass center frequency. Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz Setting the Bass Bandwidth Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. Touch [ ] or [ ] of Q to select the desired bass band width. Setting range: 1, 1.25, 1.5, 2 • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • The function is inoperable when Defeat is set to ON. Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. Touch the title bar of Treble to display the Treble adjusting screen. • Adjustment cannot be performed when Defeat is set to ON. Setting the Treble level You can emphasize the treble frequency. Touch [ ] or [ ] of Level to select the desired treble level. Setting range: -7 to +7 • You can adjust this setting by pressing and holding Rotary encoder (AUDIO) directly. Setting the Treble Center Frequency The displayed treble frequency is emphasized. Touch [ ] or [ ] of Freq. to select the desired treble center frequency. Setting range:10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • The function is inoperable when Defeat is set to ON. Adjusting Balance/Fader Touch the title bar of Balance/Fader. The display changes to the Balance/Fader adjusting screen. Display Example for Balance/Fader Screen A Adjusting the Fader Touch [F] or [R] to adjust the volume of the front and rear speakers. Setting range: F15 to R15 B Adjusting the Balance Touch [L] or [R] to adjust the sound volume of the left and right speakers. Setting range: L15 to R15 C Adjusting the Balance/Fader Directly Touch and move [ ] to a desired setting. Or touch a desired setting range, and [ ] will move to that location. Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning. Subwoofer On and Off Touch [ ] or [ ] of Subwoofer to set to ON or OFF. OFF: Subwoofer output is off. ON: Subwoofer output is on. 26-EN