Alpine IVE-W530 Owner's Manual (english) - Page 36
System Setup, System Setup Operation, Setting the Rear Camera Input - wiring
View all Alpine IVE-W530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
System Setup System Setup Operation To display the System mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the System mode screen". Each time the ignition is turned OFF, perform the procedure of "To display the System mode screen". The following steps 1 to 4 are common operations to each "Setting item" of System Setup. Refer to each section for details. 1 Touch [ ] on the main screen. The SETUP selection screen is displayed. 2 Touch the title bar of System Setup. The System Setup screen appears. 3 Touch [ ] or [ ] of the desired item to change its setting. Setting items: Camera IN / Nav. IN / Nav. Mix* / AUX1 IN / AUX2 IN / AUX Front / AUX Out / BLUETOOTH IN / Illumi Color * When ON is set in "Setting the Navigation Mode" (page 37), the item is displayed. 4 Touch [ ] to return to the previous screen. • Touching [Exit] will turn off the System Setup screen, and return to previous main screen. • Immediately after changing the settings of System Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. Setting the Rear Camera Input With an optional rear camera connected, rear view video is output to the monitor. Setting item: Camera IN Setting contents: OFF / ON OFF: ON: The Camera mode is not displayed in the mode switching screen. Use when the optional rearview camera is connected to the CAMERA Input Connector. • By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. After setting this item to ON, touch the title bar of Camera IN, the following further setting items can be adjusted. Setting the Rear Camera Signal Input The video input signal type can be chosen. Further Setting item: Camera Signal Setting contents: NTSC/PAL / Auto NTSC/PAL: Choose the video input signal type manually. Auto: The suitable video input signal type will be automatically chosen between NTSC and PAL. • When set to Auto, unstable display may occur while playing back certain black and white video signal. In this case, select NTSC or PAL mode manually. Rear camera guide line display setting You can set whether the rear camera guide line is displayed or not. Further Setting item: Guide Line Setting contents: OFF / ON Adjusting the Rear Camera Guide line You can adjust the rear camera guide line position. Further Setting item: Guide Line Adjustment 36-EN