Alpine IVE-W530 Owner's Manual (english) - Page 34
Adjusting Tint of Picture, Adjusting Image Contrast, Adjusting Picture Quality, Storing Visual EQ - set clock
View all Alpine IVE-W530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Adjusting Tint of Picture Setting item: Tint Setting content: G15 ~ R15 Adjust the color from G15 to R15. "G MAX" or "R MAX" is displayed at the maximum of each color. • Tint adjustment can be made only in the iPod video, DVD, USB Video, AUX modes. • When the picture from the external input is set to PAL, you cannot adjust the Tint. • Tint adjustment cannot be made if a Navigation system with the RGB feature is connected. Adjusting Image Contrast Setting item: Contrast Setting content: -15 to +15 Adjustment of contrast is done in the range of -15 to +15. "HIGH" and "LOW" appear as the maximum and minimum values specified. Adjusting Picture Quality Setting item: Sharp Setting content: -5 to +5 Picture quality adjustment range is -5 to +5. "SOFT" and "HARD" appear as the minimum and maximum values specified. • Picture quality adjustment can be made only in the iPod video, DVD, USB Video, AUX modes. • Picture quality adjustment cannot be made if a Navigation system with the RGB feature is connected. Storing Visual EQ You can store the settings made for "Adjusting Image Brightness, Tint, Depth, Picture Quality and Contrast." Setting item: User Memory Setting contents: P-1 / P-2 1 After completing "Adjusting Brightness, Tint, Color, Sharpness, and Contrast" (pages 33-34), touch [ ] or [ ] of User Memory and then select preset number "P-1" or "P-2" to which the settings are to be stored. 2 After selecting a preset No., touch [L-Memory]. The adjusted Visual EQ mode is stored by the above operations. • You can recall the Visual EQ mode stored here from P-1 or P-2 of "Selecting the Visual EQ Mode (Factory's setting)" (page 33). General Setup General Setup Operation To display the General mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the General mode screen". Each time the ignition is turned OFF, perform the procedure of "To display the General mode screen". The following steps 1 to 4 are common operations to each "Setting item" of General Setup. Refer to each section for details. 1 Touch [ ] on the main screen. The SETUP selection screen is displayed. 2 Touch the title bar of General Setup. The General Setup screen appears. 3 Touch [ ], [ ] or the title bar of setting item, etc., of the desired item to change its setting. Setting items: Clock / Clock Mode*1 / Clock Adjust*1 / Summer Time*1 / Demonstration / Beep / Beep Level*2 / Auto Scroll / Language Sel. / Dimmer Level*3 *1 Displayed only when "Clock" is set to "ON". *2 When Beep is ON, the item is displayed. *3 Not displayed when "OFF" is set in "Setting the Brightness of the Backlighting" (page 32). 4 Touch [ ] to return to the previous screen. • Touching [Exit] will turn off the General Setup screen, and return to previous main screen. • Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. Displaying the Time The clock indication on the monitor display is turned on or off respectively. Setting item: Clock Setting contents: OFF / ON 34-EN