Asus P4T533 P4T533 User Manual - Page 31

Installing Memory - c bios

Get Asus P4T533 PDF manuals and user guides View all Asus P4T533 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2.5.2 Installing Memory The memory module (RIMM) will fit in only one orientation. IMPORTANT: Do not touch the memory module's connectors. Handle the module only by the edges. RIMM Sockets RIMM with Heat Spreader P4T533 ® C-RIMM P4T533 184-Pin RIMM Sockets 1. Make sure that the notch keys in the module are aligned with the small ribs inside the RIMM sockets. 2. With the ejectors in the open position (as shown), push down gently but firmly on the memory module until it snaps into place. The guides on the socket's ejectors should go through the two mounting notches on the module and the ejectors should close. If necessary, push the ejectors inward to secure the module in place. No hardware or BIOS setup is required after adding or removing memory. ASUS P4T533 motherboard user guide 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
ASUS P4T533 motherboard user guide
17
2.5.2
Installing Memory
The memory module (RIMM) will fit in only one orientation.
IMPORTANT:
Do not touch the memory module’s connectors. Handle
the module only by the edges.
P4T533
P4T533 184-Pin RIMM Sockets
RIMM Sockets
RIMM with Heat Spreader
C-RIMM
2.
With the ejectors in the open position (as shown), push down gently but
firmly on the memory module until it snaps into place. The guides on the
socket’s ejectors should go through the two mounting notches on the
module and the ejectors should close. If necessary, push the ejectors
inward to secure the module in place.
1.
Make sure that the notch keys in the module are aligned with the small
ribs inside the RIMM sockets.
No hardware or BIOS setup is required after adding or removing memory.