Asus P4T533 P4T533 User Manual - Page 65

ASUS P4T533 motherboard user guide, POST Message, Action

Get Asus P4T533 PDF manuals and user guides View all Asus P4T533 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

POST Message Action No keyboard detected • Check your keyboard if properly connected to the purple PS/2 connector on the rear panel. • See section "1.4 Identifying the motherboard components" for the location of the connector. No floppy disk detected • Make sure you have connected a floppy disk to the floppy disk connector on the motherboard. • See section "2.8 Connectors." No IDE hard disk detected • Make sure you have connected an IDE hard disk drive to the one of the IDE connectors on the motherboard. • See section "2.8 Connectors." • If you have connected the IDE device to the optional onboard IDE/ RAID controller connector(s), then ignore this message. CPU temperature too high • Check CPU fan if working properly. CPU fan failed • Check the CPU fan and make sure it turns on after you applied power to the system. CPU voltage out of range • Check your power supply and make sure it is not defective. • Call ASUS technical support for assistance. See the "ASUS contact information" on page viii. System completed Power-On Self Test • No action required Computer now booting from operating • No action required system You may disable the ASUS POST Reporter in the BIOS setup. See section "4.4.2 I/O Device Configuration". ASUS P4T533 motherboard user guide 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
ASUS P4T533 motherboard user guide
49
No keyboard detected
•
Check your keyboard if properly
connected to the purple PS/2
connector on the rear panel.
•
See section “1.4 Identifying the
motherboard components” for the
location of the connector.
No floppy disk detected
•
Make sure you have connected a
floppy disk to the floppy disk
connector on the motherboard.
•
See section “2.8 Connectors.”
No IDE hard disk detected
•
Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
•
See section “2.8 Connectors.”
•
If you have connected the IDE
device to the optional onboard IDE/
RAID controller connector(s), then
ignore this message.
CPU temperature too high
•
Check CPU fan if working properly.
CPU fan failed
•
Check the CPU fan and make sure
it turns on after you applied power
to the system.
CPU voltage out of range
•
Check your power supply
and
make sure it is not defective.
•
Call ASUS technical support for
assistance. See the “ASUS contact
information” on page viii.
System completed Power-On Self Test
•
No action required
Computer now booting from operating
•
No action required
system
POST Message
Action
You may disable the ASUS POST Reporter in the BIOS setup. See
section “4.4.2
I/O Device Configuration”.