Brother International BAS-342E Instruction Manual - English - Page 30
Using, bobbin, thread, counter
View all Brother International BAS-342E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
6. Panel operation 6-8. Using the bobbin thread counter Set the bobbin thread counter to display the number of pieces of the selected pattern which can be sewn with the amount of thread on the bobbin to avoid running out of bobbin thread in the middle of a patern. brother BAS-300E series 7Q7~L NO. PROGRAM NO. .2( = MENU n Mfg X-SCALE kV* R/W Y-SCALE 0 SPEED /74•(-1-5Y\ B.T. COUNTER O SPLIT NO. O POWNER B.T. SET B.T. CHANGE T.7. f• TEST 0 STEP BACK a) 1. Press the MENU switch 0 until the B.T. COUNTER indicator illuminates. e, e 2. While pressing the STEP BACK switch turn the dial to set the number of articles to be embroidered. • The bobbin thread counter can be set to any number from to . If the counter is set to , sewing continues irrespective of the amount of bobbin thread remaining. e. 3. Insert the floppy disk and press the bobbin thread SET switch An alarm will beep twice. This willrecord the number of work pieces shown in the counter 0 to the disk. 4. The number shown in the counter 0 will decrease one each time the stitch pattern is completed.When the number of patterns shown in the counter is sewn, the counter 0 will red , and an alarm will sound. (The sewing machine will not start even if the start switch is pressed.) e) 5. Press the bobbin thread change switch and replace the bobbin. The alarm will stop, and the number of work pieces set in step 3 will be displayed again in the counter 0. BAS-341E • 342E 23