Brother International BAS-342E Instruction Manual - English - Page 50
starting switch
View all Brother International BAS-342E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
■ DIP switch SW No. ® - 5 ® -6 *- 7 10. DIP switch When ON After sewing is completed, work clamp does not automatically rise (only in split mode) Clamping force output is produced (Inner clamping device available as an option) Single-pedal operation using the starting switch; when the starting switch is pressed, the work clamp drops, and when it is released, sewing starts. ® - 8 ■ DIP switch (I) Thread breakage detector device is activated (available as an option) SW No. # -1 When ON Single split mode activated # -2 # -3 0 -4 - Thread is not trimmed after an emergency stop Needle cooler output is produced. 0 -5 When a rotating-type thread breakage detector device is used, detection precision is increased from 8 to 14. When a fiber-type thread breakage detector device is used, detection precision is increased from 5 to 10. 0 -6 # -7 # -8 Fiber-type thread breakage detector device is ON, and DIP switch ® - 8 is ON (available as an option). When using a 3-stage pedal Feeding speed is switched to high speed. BAS-341E • 342E 43