Brother International BAS-342E Instruction Manual - English - Page 47

9. Standard adjustments 9-12. Checking the input sensor and DIP switch input brother BAS-300E series • • • ,It/S R/W Mfg • X-SCALE rm f4-c: Y-SCALE 0 SPEED B.T. COUNTER ' , • SPLIT NO. POWER B.T. SET B.T. CHANGE 5-'7. ITEST STEP BACK • 0 -Ell N>Ell Ell CM LA DE cY, Ell Ell O0 OFF OFF Ell 4,,EN CA O0EN 1. When the SPLIT NO. indicator 0 is illuminated and the R/W switch 0 is pressed while the TEST switch 0 is being pressed, the X-SCALE indicator 0 will illuminate and the state of the X home position signal will appear on the display screen 0. • When sensor is ON I I 1 I • When sensor is OFF 2. Each time the MENU switch 0 is pressed, a different indicator will illuminate and the operating condition for the corresponding item will appear on the display screen. • When X-SCALE indicator is illuminated : X home position sensor • When Y-SCALE indicator is illuminated : Y home position sensor • When SPEED indicator is illuminated : Needle up signal (synchronizer) • When B.T. COUNTER indicator is illuminated 24-section signal (synchronizer) • When SPLIT ON. indicator is illuminated : Needle down signal (synchronizer) 3. If the settings for DIP switch @ at the side of the operation panel are changed at this time, the number of the changed switch will appear in the top row of the program number display 0. If 4. If the settings for DIP switch CD are changed at this time, the number of the changed switch will appear in the bottom row of the program number display 0. Isf H BAS-341E • 342E 40