Brother International BAS-342E Instruction Manual - English - Page 49

10. DIP switch 10. DIP switch NOTE When changing DIP switch, the power must be off. 10-1. Panel DIP switch functions -vCvZ OF .CM a ,,AZE .01 -CM .CE -CO OFF "711 .CM ..1=1 .CM -CM .CM I DIP switch SW No. When ON - ® -1 After sewing is complete, the work clamp is raised by the operator and does not rise automatically. • Various setting combinations for DIP switch No. 2, No. 3 and No. 4 can be used to change the way the work clamp is raised and lowered. • The operation mode can be changed using the two-stage work clamp switch. SW ® - 2 SW ® - 3 SW ® -4 Type Function of work clamp pedal - - - ON - Air For split-type presser foot, the left/right order changes alternately. ON ON - Air Only work clamp rises and lowers; presser foot lowers when starting switch is pressed. - - ON Air Work clamp and presser foot rise and lower simultaneously. ON - ON Air Lowers in the order right work clamp left work clamp, presser foot; reverse order when rising. - ON ON Air Lowers in the order left work clamp right work clamp, presser foot; reverse order when rising. ON ON ON Air Lowers in the order left and right work clamp presser foot; reverse order when rising. BAS-341E • 342E 42