Brother International BES Monogramming Suite Instruction Manual - English - Page 64

62 Pacesetter BES Monogramming Suite Instruction Manual Lock Stitches You can choose to add lock stitches to the lettering using the Lock Type field in the properties panel. The options are: • Always • Never • Around trim Fill Density Setting The density of monogram lettering can be changed in the Properties panel. Fill density is the distance between individual lines of embroidery, and is measured in millimeters. Note that, in Pacesetter BES Monogramming Suite, the fill density can only be adjusted for monogram lettering; you cannot change the fill density of other embroidery objects, such as Decors and Frames. Use the density setting to adjust your fill to suit the fabric you are sewing on. For example, fabrics with a very loose weave are less able to hold a large density of stitches; in cases such as this, you can lower the density of the fill. If you are unsure what setting to use, try the standard setting of 0.4. This setting works well almost universally, as long as you have not exceeded the font's size recommendations. Density is given in millimeters; larger values correspond to a lower density, while lower values correspond to a higher density. In the Fill area, you will see that the image beneath the density setting changes as you adjust it. These are not precise images; rather, they are intended to provide you with visual cues to what you are doing as you change the settings.