Brother International IntelliFax-2480C Users Manual - English - Page 74
To erase all of your messages, Additional Message Center operations
View all Brother International IntelliFax-2480C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Message Center (FAX-2580C only) To erase all of your messages 9 a Press Erase. b Press a or b to choose one of the options below. Then press OK. Erase All Voice? All voice message Erase All Fax? All fax messages Erase All Msg.? All voice and fax message c Do one of the following: Press 1 to erase all of your messages. Press 2 to cancel. d Press Stop/Exit. Additional Message Center operations 9 Setting maximum time for incoming messages 9 Your machine's default setting will save incoming messages up to 30 seconds long. To change this setting follow the steps below: a Press Menu, 2, 7, 2. 7.Setup Msg Ctr 2.ICM Max.Time b Press a or b to choose the maximum time setting for incoming messages (30, 60, 120 or 180 seconds). Press OK. c Press Stop/Exit. Setting toll saver 9 9 When the toll saver feature is on, the machine will answer after two rings if you do have voice or fax messages, and after four rings if you do not have any messages. This way, when you call your machine for remote retrieval, if it rings three times, you have no messages and can hang up to avoid a toll charge. The toll saver feature is only available when Message Center mode is on. When toll saver is On, it overrides your ring delay setting.If you are using Distinctive Ring, do not use the Toll Saver feature. a Make sure you are in fax mode. If not then press (Fax). b Press Menu, 2, 1, 1. 1.Setup Receive 1.Ring Delay 59