Brother International MFC-9550 Owners Manual - Page 152

139 I M P O R T A N T I N F O R M A T I O N Cut each of the three wires to the appropriate length. If the construction of the plug permits, leave the green and yellow wire longer than the others so that, in the event that the cord is pulled out of the plug, the green and yellow wire will be the last to disconnect. Remove a short section of the coloured insulation to expose the wires. The wire which is coloured green and yellow must be connected to the terminal in the plug which is mared with the letter "E" or by the earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter "N" or coloured black or blue. The wire which is coloured brown must be connected to the terminal which is marked with the letter "L" or coloured red or brown. The outer sheath of the cord must be secured inside the plug. The coloured wires should not hang out of the plug. BABT Approval This apparatus has been approved by the British Approvals Board for Telecommunications, for use of the following facilities: INTEGRAL MODEM IN GROUP 3 FACSIMILE LOUDSPEAKING FACILITY (CALL PROGRESS MONITOR) STORAGE OF TELEPHONE NUMBERS FOR RETRIEVAL BY PREDETERMINED CODE CONNECTION TO AN APPROVED PBX (PRIVATE BRANCH EXCHANGE) OPERATION IN THE ABSENCE OF PROCEED INDICATION AUTOMATIC STORAGE OF THE LAST NUMBER REDIALLED SERIES CONNECTION FACILITY Any other usage will invalidate the approval of the apparatus, if as a result it then ceases to comply with the standards against which approval was granted. The machine is approved for connection to a single exclusive direct exchange line provided by BT, Kingston-upon-Hull Telecommunications and CATV, and to approved Private Automatic Branch Exchanges (PABXs).