Brother International MFC-9550 Owners Manual - Page 42
Initial, Setup
View all Brother International MFC-9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4C H A P T E R F O U R Initial Setup 29 Getting Started Setting the Dialling Mode (Tone/Pulse) Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below. 1 For the MFC-9050, Press Menu, 1, 1. For the MFC-9550, Press Menu, 1, 1, 1. The screen prompts you to select TONE or PULSE. DIALLING:TONE DIALLING:PULSE 2 Use or to select the dialling mode. 3 Press Set when the screen displays the dialling mode you want. 4 Press Stop to exit. Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use the Tone signalling for access to public or private emergency services. The Tone signalling also provides faster call set up.