Brother International MFC-9550 Owners Manual - Page 55
Reception into Memory
View all Brother International MFC-9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
42 C H A P T E R F I V E If you receive faxes that are split on two pages, change the reduction to AUTO --OR-- choose a lower reduction percentage. NOTE: s When you use Auto Reduction to reduce incoming documents to fit on one page of recording paper, you can do so only as long as the original document is not longer than 35 cm. If the original is longer than 35 cm, the data will not be reduced and will carry over to print on a second page. s When you use Auto Reduction and you receive an incoming document that is smaller than your recording paper, no reduction will take place, and you will get the same size recorded as the original. Reception into Memory As soon as the paper cassette becomes empty during fax reception, the screen will display CHECK PAPER; please put some paper in the paper cassette (see chap. 1). If the MEMORY RECEPTION setting is ON at this time... The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming faxes will also be stored into memory until the memory is full, following which no further incoming fax calls will be automatically answered; all data will be printed as soon as fresh paper is put in the paper cassette. If the MEMORY RECEPTION setting is OFF at this time... The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming fax calls will not be automatically answered until fresh paper is put in the paper cassette. The last fax received will be printed as soon as fresh paper is put in the cassette. 1 For the MFC-9050, Press Menu, 2, 6. For the MFC-9550, Press Menu, 1, 2, 6. The screen displays 6.MEM.RECEIVE 2 Use or to select ON or OFF. 3 Press Set when the screen displays your selection. 4 Press Stop to exit.