Brother International MFC-9550 Owners Manual - Page 156
Error Message, Cause, Action
View all Brother International MFC-9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
143 T R O U B L E S H O O T I N G A N D M A I N T E N A N C E ERROR MESSAGE NO RESPONSE/BUSY NOT ASSIGNED PRINT OVERRUN PRINTER JAM SET CARTRIDGE TONER EMPTY CHANGE TONER CAUSE ACTION The number you called does not Check the number and try again. answer or is busy. Or, you may have reached a number that is not connected to a fax machine. You tried to access a One Set up the One Touch or Speed Touch or Speed Dial number Dial number. See chap. 7 that is not programmed. The available Ram has been exceeded. • Press the FF/Cont to print the data remaining in the printer memory. • If you have installed the Windows® printer driver, try again after setting the TrueType mode to "Print as Graphics" in the PRINT menu of you application software. • If this does not clear the error, recuce the complexity of your document or reduce the print resolution. The recording paper is jammed Do not pull the paper out until in the machine. you see next page. Toner cartridge is not installed. Reinstall the toner cartridge. Toner is used up and printing is Replace the toner cartridge with not possible. a new one. (See "Replacing the Toner Cartridge" in this chapter). If the display shows CHANGE Order a new toner cartridge TONER and at the same time now. the Toner Empty LED on the controlpanel flashes on and off, you can still print. But the toner is depleted and the machine is telling you that the toner will soon run out.