Brother International MFC-9550 Owners Manual - Page 88

75 S E T U P Q U I C K - D I A L N U M B E R S 7 Press Set. 8 The screen prompts you to select the type of number this is. Use or to select the type you want. FAX TEL F/T a fax number a telephone (voice) number both a fax and telephone number 9 Press Set. 10 Return to Step 2 to store another Speed Dial number. --OR-- Press Stop to exit. Changing One Touch and Speed Dial Numbers If you try to store a One Touch or Speed Dial number in a location where a number is already stored, the screen displays the current name stored there, then prompts you to either change it or exit. 1.CHANGE 2.QUIT 1 Press 1 to change the number stored, or press 2 to exit without making a change. 2 Enter a new number. s If you want to erase the number, press Clear when the cursor is to the far left of the digits. s If you want to change a digit, use or to position the cursor under the digit you want to change, then enter it. 3 Follow the directions in Storing One Touch Dial or Speed Dial Numbers. See "Storing One Touch Dial Numbers" and "Storing Speed Dial Numbers" in this chapter Setting Up Groups for Broadcasting Groups allow you to send the same fax message to many fax numbers by pressing only one One Touch Dial key (This is called Broadcasting.). First, you'll need to store each fax number as a One Touch or Speed Dial number. Then, you can combine them into a Group. Each Group uses up a One Touch Dial key. Finally, you can have up to 6 small Groups, or you can assign up to 123 numbers to one large Group.