Brother International MFC-J430w Users Manual - English - Page 78
pull out the paper support 1 until it, Push the paper tray firmly back into
View all Brother International MFC-J430w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
IMPORTANT • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If the print head is in the right corner as shown in the illustration, you cannot move it. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the center. Then unplug the machine from the power source and take out the paper. k Push the two green levers back to their original positions. • If ink gets on your skin or clothing immediately wash it off with soap or detergent. j Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover. l Push the paper tray firmly back into the machine. m While holding the paper tray in place, pull out the paper support (1) until it clicks, and then unfold the paper support flap (2). 2 1 Make sure you pull out the paper support until it clicks. IMPORTANT DO NOT use the paper support flap for Legal size paper. n Re-connect the power cord. 64