Brother International MFC-J4510DW Quick Setup Guide - English - Page 34
Manual setup from the, control panel using the, Setup Wizard Macintosh, mobile devices and, Windows
View all Brother International MFC-J4510DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
For Wireless Network Users 19 Manual setup from the control panel using the Setup Wizard (Macintosh, mobile devices and Windows®) You must have the wireless settings you wrote down for your network in step 18-b on page 30 before you proceed. a Press . Press Setup Wizard. When Switch Network interface to wireless? is displayed, press Yes to accept. This will start the wireless setup wizard. To cancel, press No. b The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs. If a list of SSIDs is displayed, swipe up or down, or press a or b to choose the SSID you wrote down in step 18-b on page 30. Select the SSID you want to connect with. Press OK. If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, go to c. If the machine asks you to enter a Network Key, go to d. Otherwise, go to e. NOTE • If a list of SSIDs is not displayed, make sure your access point is on. Move your machine closer to the access point and try starting from a again. • If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For details, see the Network User's Guide. c Press Yes to connect your machine using WPS. (If you choose No to continue manual configuration, go to d to enter a Network Key.) When the Touchscreen shows to start WPS, press the WPS button on your wireless access point/router, and then press Next to proceed. Go to e. d Enter the Network Key you wrote down in step 18-b on page 30 using the Touchscreen. Press to cycle between lower case and upper case. Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.) To move the cursor to the left or right, press d or c. (For more information, see Entering Text for Wireless Settings on page 45.) Press OK when you have entered all the characters, then press Yes to apply your settings. e Your machine will now try to connect to your wireless network. It may take a few minutes. f A connection result message appears for 60 seconds on the Touchscreen and a WLAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 36. Wireless setup is now complete. The Wi-Fi button at the upper right of the Touchscreen changes to a four-level indicator that displays the wireless signal strength of your access point/router. The Wi-Fi LED on the control panel lights up, indicating that the machine's Network I/F is set to WLAN. To install MFL-Pro Suite, continue to step 20. For Windows® users: Now go to Page 38 For Macintosh users: Now go to Page 41 34