Brother International MFC-J6510DW Users Manual - English - Page 114
Dial Tone, Telephone line interference / VoIP
UPC - 012502626626
View all Brother International MFC-J6510DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Dial Tone B Setting the dial tone to Detection will shorten the dial detect pause. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Dial Tone. d Press d or c to choose Detection or No Detection. Press OK. e Press Stop/Exit. Telephone line interference / VoIP B If you are having problems sending or receiving a fax due to possible interference on the telephone line, we recommend that you change the modem speed to minimize errors in fax operations. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Compatibility. d Press d or c to choose High, Normal or Basic(for VoIP). Basic(for VoIP) reduces the modem speed to 9,600 bps and turns off color fax receiving and ECM, except for color fax sending. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed. To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP). Normal sets the modem speed at 14,400 bps. High increases the modem speed to 33,600 bps. (factory setting) Press OK. e Press Stop/Exit. Note VoIP (Voice over IP) is a type of phone system that uses an internet connection, rather than a traditional phone line. 100