Brother International MFC-J6510DW Users Manual - English - Page 49

Sending a fax Setting scanner glass size for faxing 4 When documents are A4 size, you need to set the Scan Size to A4. If you do not, the bottom portion of the faxes will be missing. a Press (FAX). b Press a or b to choose Glass ScanSize. c Press d or c to choose Letter, Legal, Ledger, A4 or A3. Press OK. Note • You can save the setting you use most often by setting it as default. (See Setting your changes as the new default in chapter 3 of the Advanced User's Guide.) • This setting is only available for sending documents from the scanner glass. Color fax transmission 4 Your machine can send a color fax to machines that support this feature. Color faxes cannot be stored in the machine's memory. When you send a color fax, the machine will send it in real time (even if Real Time TX is set to Off). Canceling a fax in progress 4 If you want to cancel a fax while the machine is scanning, dialing or sending, press Stop/Exit. How to preview an outgoing fax 4 You can preview a fax message before you send it. You must set the Real Time Transmission and Polling RX to Off before you use this feature. a Press (FAX). b Load the document. 4 c Enter the fax number using the dial pad, One Touch or Speed Dial. d Press Fax Preview. The machine starts scanning the document and the outgoing fax appears on the LCD. When the fax is open the control panel keys will perform the operations shown below. Key a or b d or c Description Enlarge the fax. Reduce the fax. Scroll vertically. Scroll horizontally. Rotate the fax clockwise. Go back to the previous page. Go to the next page. Note If you preview a color fax before it is sent, you will only be able to send it in black & white. To send a color fax do not press the Fax Preview key. e Press Black Start. Note The fax message in the memory will be sent and then erased when you press Black Start. 35