Brother International PR-1000 Operation Manual - Page 201
using the positioning keys, rehoop the fabric
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Touch 0 to display the grid lines. If the pattern position cannot be aligned b using the positioning keys, rehoop the fabric, and then try again to align the position with the positioning keys. Note ● After you have aligned the position of the combined border pattern, do not rotate the pattern in the embroidery settings screen. If the pattern is rotated in the embroidery settings screen, you cannot sew the pattern properly aligned even if the thread mark and the starting point are aligned in the camera view window. Touch the positioning keys to move the a embroidery frame until the thread mark on the fabric is aligned on the starting point in the camera view window. Touch c screen. to return to the previous Remove the thread mark. d Touch . e 1 Touch , and then press the start/ f stop button to start embroidering. 2 5 3 1 Grid lines 2 Thread mark on the fabric 3 Positioning keys • Touch position. to check the embroidering Memo ● Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the needle drop position moving the embroidery frame little by little. Editing the Embroidery Pattern (Pattern Editing Screen) 199