Brother International PR-1000 Operation Manual - Page 269
Open the clamping frame. Also, open brim
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
With your fingers behind the handles on the 2 left and right sides of the mounting jig, push the cap frame onto the mounting jig by pushing the handles on the left and right sides of the cap frame with your thumbs. Align the center of the stabilizer with the 4 center of the brim holder. We recommend a stabilizer size of 100 × 510 mm (4 × 20 inches). 1 Handle on mounting jig 2 Handle on cap frame X The cap frame is secured when the two holders on the cap frame snap into place. Release the snap lock on the cap frame by 3 pressing down and then disengage the latch. Open the clamping frame. Also, open brim holder. 1 Teeth • Make sure that the teeth go through the stabilizer to firmly secure it. Push both ends of the stabilizer into the 5 holes at the bottom of the cap frame to firmly secure it. 1 Snap lock released 2 Clamping frame opened 3 Brim holder 7 Using the Optional Cap Frame 267