Brother International PR-1000 Operation Manual - Page 272
rounded shape.
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
APPENDIX Close the lever of the snap lock. b Pull the brim holder up as far as possible, c flipping the holder over the cap brim then pushing down on the holder to secure the brim. 1 Lever of the snap lock Note ● If the cap fabric is thick and the clamping frame cannot be closed, or if the fabric is thin and the cap is too loose within the frame, loosen the screw for the inside clamping frame, and then adjust the inside clamping frame. 1 Brim holder 2 Center line of brim holder • Make sure the notch comes out. Adjust the brim so that it maintains a d rounded shape. 1 Inside clamping frame 2 Screw for the inside clamping frame While pulling the lever toward you that is e located behind the handle on the right side of the mounting jig, rotate the cap frame to the left. After the cap frame has been rotated 90°, release the lever to lock the cap frame in place. 270 1 Handle 2 Lever