Brother International PR-1000 Operation Manual - Page 271

Close the clamping frame so that the brim of 9 the cap passes between the inside clamping frame and the outside clamping frame. Note ● Loosen the two screws for the outside clamping frame, and then adjust the position of the outside clamping frame so that it conforms to the shape of the cap and so that the teeth of the clamping frame perfectly align with the base of the brim. 1 Brim of the cap 2 Inside clamping frame 3 Outside clamping frame Neatly align the teeth of the clamping frame 0 with the base of the brim. 1 Teeth of outside clamping frame 2 Base of brim 1 Teeth of outside clamping frame 2 Base of brim 3 Outside clamping frame 4 Screws for the outside clamping frame Secure the clamping frame with the snap a lock. At this time, push the end of the sweat guard into the cap so it does not interfere with the snap lock. 7 1 Snap lock 2 Fold the sweat guard as shown. Note ● Before closing the lever of the snap lock, check that the cap has not moved out of position and that there are no wrinkles. Adjust the cap if necessary. Using the Optional Cap Frame 269