Brother International PR-1000 Operation Manual - Page 29
Setup location
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup location Set up the machine in a location that meets the following requirements. • Position the machine a minimum of 50 mm (2 inches) away from the wall • Allow sufficient space around the machine • Place no objects within the moving range of the embroidery frame 1 • Set-up machine near an electrical outlet • Use a level and stable surface, such as a desk or stand. • Use a surface that can support the weight of the machine (about 42 kg (92 lb)) • Allow open space around the ventilation slots found on the rear underside of the machine Minimum of 50 mm (2 inches) 785 mm (30-3/4 inches) 589 mm (23-3/16 inches) More than 210 mm (8-1/64 inches) 560 mm (22-13/32 inches) More than 350 mm (13-7/8 inches) 220 mm (8-21/32 inches) CAUTION ● In order to prevent malfunctions or damage, do not set up the machine in a location exposed to the following conditions. Liquids, such as water Extreme dust Direct sunlight Insufficient space Objects within the moving range of the embroidery frame Extremely high or extremely low temperatures. The operating environment should be between 5 °C (40 °F) and 40 °C (104°F). Blocked ventilation slots An unstable surface Connection to extension cords or multiple adapters Note ● For your safety: Since the machine weighs approximately 42kg (92 lb), do not set it up on an unstable table or desk. Setting Up the Machine 27