Brother International PR-1000 Operation Manual - Page 285
Cleaning around the needle, plate
![]() |
View all Brother International PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Use the included cleaning brush to remove 3 any lint and dust from the hook and its surrounding area. CAUTION ● If the hook is scratched or damaged, consult your Brother dealer. Cleaning around the needle plate If lint and dust collect around the moving knife, the fixed knife or the thread retaining plate, the thread may not be cut correctly and the error message may appear, or various parts of the machine may be damaged. Make sure to clean around the needle plate once a month. Use on offset screwdriver and the included cleaning brush. Turn off the embroidery machine. 1 After cleaning is finished, insert the bobbin 4 case into the hook, and then close the hook cover. (Refer to page 38, 39.) CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Remove the needle plate. 2 With an offset screwdriver, loosen the screws, and then remove the needle plate. 7 1 Needle plate Maintenance 283
![](/manual_guide/products/brother-international-pr1000-operation-manual-c90de7a/285.png)