Brother International PT-3600 Users Manual - English and Spanish - Page 105
Change the HALF CUTTER setting. Refer, The cutter does not cut correctly.
UPC - 012502602804
View all Brother International PT-3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
TROUBLESHOOTING Problem Solution (8) The tape is not ejected correctly after ● Turn off the machine, open the tape com- being automatically cut. partment cover, and remove the tape cas- sette if one is installed. ● Using a cotton swab, clean off the metal piece in the exit slot to the left of cutter. Cotton swab Metal piece (Area to be cleaned) (9) The cutter does not cut correctly. ● Change the HALF CUTTER setting. (Refer to page 82.) ● The cutter may be dull. Contact your service representative. 93
93
TROUBLESHOOTING
(8)
The tape is not ejected correctly after
being automatically cut.
●
Turn off the machine, open the tape com-
partment cover, and remove the tape cas-
sette if one is installed.
●
Using a cotton swab, clean off the metal
piece in the exit slot to the left of cutter.
(9)
The cutter does not cut correctly.
●
Change the HALF CUTTER setting. (Refer
to page 82.)
●
The cutter may be dull. Contact your ser-
vice representative.
Problem
Solution
Cotton swab
Metal piece
(Area to be cleaned)