Brother International PT-3600 Users Manual - English and Spanish - Page 81
Print key, To change the setting for the Auto Cut, function, To print a label
UPC - 012502602804
View all Brother International PT-3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Functions When the last label is printed, press f to feed the chain of labels and cut it. When setting 1, 2, 3 or 4 is selected, the Auto Cut indicator in the upper-right corner of the display comes on, indicating that the labels will be cut off after the last label in the chain is printed. Ch. 3 Functions NOTE ☞ After printing a label on TZ tape with the Auto Cut function set to 5, 6, 7 or 8, press f to feed the tape, then cut it. ☞ This function can also be specified with the P-touch Editor 3.2 software. R1 2 3 4 5 6 7 8 9 A B C D E RRRG H RI RJ NO > 1LM:_ AUTO 1.10 HELSINKI A F K QQQQQQQQQQQQ AUTO Length Margin Font Width Size NOTE ☞ AV labels are always cut after they are printed regardless of the current Auto Cut setting. ☞ When setting 5, 6, 7 or 8 is selected, the Auto Cut indicator does not come on. The following Auto Cut settings are available: 1 (both full and half cuts- no chain printing) 2 (full cuts only-no half cuts and no chain printing) 3 (half cuts only-no full cuts and no chain printing) 4 (no full, half cuts or chain printing) 5 (full, half cuts and chain printing) 6 (full cuts and chain printing-no half cuts) 7 (half cuts and chain printing-no full cuts) 8 (chain printing-neither full nor half cuts) To change the setting for the Auto Cut function: 1 Hold down d and press f. R1 2 3 4 5 6 7 RRRG H RI RJ NOLMA.1CUT 1.3 1.10 89 ABC HELSINKI D E A F K QQQQQQQQQQQQ AUTO Length Margin Font Width Size 2 Press m or g until the desired setting is displayed. The current setting is shown on the left side of the display and a sample can be seen on the right side. NOTE ☞ To return the function to its default setting (1), press the space bar. ☞ To return to the text without changing the setting for the Auto Cut function, press e (OR hold down d and press f ). 3 Press n to apply the setting. Print key (p) After you have typed in your text and chosen all of the desired format settings, you are ready to print it. NOTE Depending on the setting selected for the Auto Cut function, TZ labels will automatically be cut after they are printed. AV labels are always cut after they are printed. To print a label: ● Press p. The message "COPIES" followed by the number of the label being printed appears. 69